Tactical
Piston Drive
EZ Series
Smart Ring
Infilux
Accessories
Batteries
Chargers
Nitecore D11 XP-G R5
The new Nitecore D11 utilises the smart piston drive switching system, as found in the D10 and EX10 models, effectively doing away with the common tail switch.
Utilising a Cree XP-G R5 LED with a maximum output of 145 lumens, the D11 has a variable brightness system allowing the user to select any level between 3 and 145 lumens. Additional strobe and SOS settings are easily selectable.
Waterproof to IPX-8 and impact resistant according to US MIL-STD-810F making the D11 the ultimate every day carry flashlight.
Due in stock mid August
Nitecore D11 Specifications:
- Unique electronic-controlled Smart-PD switch, proven to be very reliable;
- Infinitely Variable Digital-controlled Brightness System
- Intuitive and simple user interface
- Defensive Strobe and emergency SOS functionality
- Made from military grade aluminum alloy, extremely strong
- Compact size and light weight, suitable for EDC (every day carry)
- Mil-Spec Type III Hard Anodized finish
- Resistant to impact by dropping according to US MIL-STD-810F
- Waterproof to IPX-8 standard
- Broad-voltage fully-regulated circuit, compatible with one AA battery or other cells of the same size
- Premium high efficiency CREE XP-G R5 LED
- Max output 145 lumens
- Metal reflector
- Ultra clear impact-resistant optical lens
- Ability to tail stand for use as a candle light. Output & Runtime Maximum output 145 lumens, for about 1.5 hours Minimum output 3 lumens, for about 100 hours
- Length: 89mm
- Diameter: 19mm
- Weight: 46g( without battery )
- Accessories: Lanyard, holster, spare o-ring
D11 User Guide:
Light Activation
Insert battery and screw the body back on fully, the light is now ON. Click the tail cap once and the light turns OFF. Click the tail cap another time to ON the light again.
Selecting Desired Brightness
When the light is ON, depress the tail cap and hold for more than 0.5 seconds, the brightness level will ramp from Max to Min or Min to Max depending on starting level; If the tail cap is released, and then depress-and-hold again, the light performs brightness ramping in the reverse direction. When the desired brightness level is reached, release the button to stop brightness ramping and the user defined brightness level in now memorized. When adjusting the brightness level the light will flash twice to alert the user maximum or minimum level has been reached.
SOS and Strobe Mode
When the light is on, quick double-click the switch - the light enters SOS directly
When the light is on, quick double-click the switch and hold - the light enters Strobe mode.
When the light enters SOS or Strobe mode, user only need to click off the light and then click on, the light will revert to memorized user-defined mode.
Momentary On Mode
Loosen the light bezel about one turn, and the light enters momentary on mode. Under this mode, depress the tail cap for ON and release to turn the light OFF.
Safety Lock-out
Safety Lock-out function can be used to avoid accidental activation. When the light is off, depress the tail cap and hold for more than 1 second, the light will flash to alert that it has entered safety lock-out mode. Then the light will not turn on due to accidental activation. Under safety lock-out mode, quick triple-click the tail cap or remove and load the battery to deactivate lockout feature.
